I recently bought an Oscar appliance, and it’s still on my list of must-haves.
I’m sure I’ve forgotten a few important details.
So here’s a quick rundown of the parts I used to get this thing fixed.
Get a screwdriver or pliers If you’re unfamiliar with how to use a screw driver, here’s what to look for.
The screwdriver is a little like a small pocket knife, and the one on the right is a bit bigger than the one I use for my kitchen countertop.
When you get the screwdriver, make sure it’s flat and straight so you can get a good grip.
The other screwdriver I used for the appliance is a slightly larger, square-shaped one.
Get some wire, wire strippers, and a small screwdriver A wire stripper is a type of drill or wire brush that cuts small holes in a surface.
It can also be used to remove large surfaces such as carpets, metal, and glass.
You can buy wire stripping kits from many hardware stores and online, but I found the ones I used from Amazon to be pretty affordable.
You don’t need a special drill bit or screwdriver for this, but a regular screwdriver won’t do the job.
You also don’t have to worry about the drill bit sticking out of the screw, so don’t bother with a special tool.
Get two wire strippings You can also use wire strips to make small holes.
The easiest way to do this is to buy two of them at a hardware store, but you can also buy them from Amazon or Ebay.
These small strips of wire will easily fit into a hole.
Take the screwdrivers and drill holes If you don’t already have a screwdrivers, this is the time to get one.
If you do have a regular tool, you can just buy a new one for the first time.
A regular screw driver will be the right size for most of these holes, and this will work better for the longer holes.
It’s important to use the right sized screwdriver when drilling holes, so make sure to test all the holes carefully before using the screw drivers.
Remove the screw that holds the appliance in place The screws are held in place by a metal nut on the back of the appliance, so they can’t be removed without breaking the screw.
You’ll need to loosen the nut, which will be easier to do by holding the appliance up with a towel or a piece of cloth.
You may have to loosen one of the screws to remove the screw on the bottom.
If the screw is on the front of the fridge, you’ll need the screw to be on the top of the cabinet or on the underside of the door.
If it’s on the side of the wall, you won’t need to worry too much about the screw sticking out.
The best way to remove this screw is to use your screwdriver and gently pry the nut away.
Remove any extra screws You’ll notice a few screws on the other side of your appliance that you don’st want to remove.
If these aren’t going to make any difference, you could just use a pair of pliers to loosen them.
If your appliance comes with screws that you use frequently, they’ll probably be easier and safer to remove than those that you won”t.
The next few steps will take some time to complete, but they should take you about an hour or two.
When done, carefully pull the screws out of your fridge and back into the appliance.