If you’ve had a broken appliance in the past, you know how frustrating it can be to find it and replace it.
But what if the problem is not your own?
That’s exactly what we wanted to know from experts from all over the world.
And now we’ve got answers.
What you need to know about appliance repairThe first step is to make sure that your appliance is still functioning.
If you find that it’s not working properly, we recommend taking it apart and replacing parts, according to a statement by appliance repair specialists from the National Appliance Repair Centre (NAPC).
You can read the full statement here.
If the problem persists, you may want to call the repair centre to make an appointment.
Then, you need your appliance’s components.
If your device has two components, you’ll need to take out the first one, or replace it with one that’s compatible.
You can find out which components your appliance has on its website, or you can contact the repair shop to get the replacement parts.
If you need assistance with any of the above, we’ve set up a video chat with experts from NAPC and the National Centre for Consumer Protection (NCCP) to help.
Here’s how to fix an appliance with one component:To fix an old appliance:Use a tool like a screwdriver to remove the bottom plate.
Remove the cover that holds the top plate.
If the problem hasn’t been resolved with a tool, contact the appliance repair shop and ask them to send you a replacement part.
If your problem is still not resolved, contact your appliance repair manager and ask for a replacement.
The manager can then give you more detailed advice.
If a problem persists:If you still have a problem, call the NAPA to see if you can find a replacement that’s not the same.
If that doesn’t work, call your appliance manager.
They’ll tell you what they’re working on, and how they’re fixing the problem.
If all else fails:If the repair is still working, the next step is replacing the damaged component.
This could be a piece of glass or a metal plate, or it could be an electrical box.
The problem is the plastic part, not the metal part, that’s holding the component together.
If that’s the case, you can use a soldering iron to solder on the damaged part, according a statement from the NACCP.